Table of Contents
Advertisement
Helpful Hint for Accurately Setting the Time:
After stopping the second hand at the 0 seconds position, advance the minute and hour
hands 4-5 minutes past the correct time and then move them back to the correct time.
Setting the time in this manner eliminates any play in the gears of the watch movement.
The hands of the watch can be made to advance at the correct time by pushing in the crown
in synchronization with a telephone time signal or other time signal.
[Procedure for Setting the Date]
• This watch is not equipped with a fully
automated calendar. It is necessary to correct
the date by operating the crown to the first day
of the following month in those months with
less than 31 days (months having 30 days and
February). (The date is displayed based on a
31 day cycle.)
10
Normal
position (0)
60
CHARGE
12
60
9
3
45
15
ON
Date correction
OFF
position (1)
120
Date
1. Pull the crown out to the date correction position (first click).
2. Set the date by turning the crown to the left. If the crown is turned to the right, nothing
will happen and the date will not change.
• Do not attempt to set the date between the hours of around 9:00 PM and 1:00 AM. If
the date is set during this time period, the date may not change on the following day.
3. Once the date has finished being set, return the crown to the normal position (0 position).
* The date will change automatically at around 12:00 AM. If the date changes at 12:00
PM, advance the time by 12 hours.
11
Advertisement
Table of Contents
