Using The Alarm - Citizen AV0025-51A Manual

7. Using the Alarm

• The alarm function uses a 12 hour indicator hand.
• When the alarm hand has been set to ON, the alarm sounds for 20 seconds when the set
time is reached. Furthermore, the alarm will only sound once. Since the alarm is based
on 12 hour clock, the alarm sounds twice in the AM and PM when it has been set.
• Since an indicator hand is used to set the alarm time, there is a certain degree of error in
the set alarm time. The indicator hand should be only be used as a rough indicator of the
set alarm time.
[Procedure for Setting
Alarm indicator hand
the Alarm Time]
Alarm crown
1. Pull the alarm crown out to the
normal position
first click.
2. Turn the alarm crown to set
the alarm indicator hand to the
time when you want the alarm
to sound.
16
60
CHARGE
12 60
9 3 45 15
First click
ON
OFF
120
Alarm hand
• In order to set the alarm time, advance the alarm indicator hand about 30 minutes past
the desired set time and then turn it back (counter-clockwise) to the desired set time.
3. Return the alarm crown to the normal position.
4. Press the alarm crown to set the alarm hand to ON.
• This completes the procedure for setting the alarm time.
[Switching the Alarm ON and OFF]
• The alarm is switched between ON and OFF each time the alarm crown is pressed.
[Stopping the Alarm]
• The alarm is stopped by pressing the alarm crown while the alarm is sounding. Note
that the alarm hand will also simultaneously be switched to OFF.
• Always make sure to wait at least 20 minutes before setting the alarm to ON again.
The alarm will sound again if the alarm hand is set to ON before 20 minutes have
passed since the alarm last sounded.
Alarm scale
17