Table of Contents
Advertisement
[Hint for Accurately Setting the Time]
After stopping the second hand at the 0 seconds position, turn the minute hand
4-5 minutes past the correct time and then turn it back to the correct time. The
time on the watch can then be set to the correct time by pushing in the crown in
synchronization with a time service tone.
[Setting the Date]
Date correction position
16
1. Pull the crown out to the date correction
position.
2. Turn the crown to the right to set the date.
• The crown turns freely and the date does
not change if the crown is turned to the left.
• If the date is set while the time on the
watch is between the hours of about 9:00
PM and 1:00 AM, the date may not change
on the following day. If this happens, set
the date after temporarily moving the
hands to a time other than between the
Date
above times.
Advertisement
Table of Contents
