Table of Contents
Advertisement
[All-Reset Procedure]
1. Pull the crown out to the time correction position (second click) when the second
hand has reached the zero seconds position.
2. Press buttons (B) and (C) simultaneously.
• The alarm sounds, the charge level indicator hand moves to "Level 3" and the
watch automatically performs the reference position alignment procedure.
3. Return the crown to the normal position.
• The charge level indicator hand performs a demonstration movement (pendulum
movement) and the second hand begins 1-second interval movement. Furthermore,
the charge level indicator hand points to level 2 or level 3.
• This completes the All-Reset procedure. Immediately correctly set the time, alarm
and other settings by following the procedure for each setting before using the
watch. Furthermore, send in your watch for repairs when the All-Reset procedure
cannot be performed.
30
[State after All-Reset has been Completed]
Chronograph second hand
Button (C)
CHARGE
12
9
3
ON
OFF
Charge level indicator hand
60
Time correction position (2)
60
45
15
Button (B)
120
Second hand
31
Advertisement
Table of Contents
