Table of Contents
Advertisement
2.Press button (B) to reset the chronograph to 0 seconds after it has been stopped.
• The chronograph is not reset if button (B) is pressed while timing is in progress. To
reset the time, press button (B) after first interrupting timing by pressing button (A).
* If the chronograph is repeatedly started and stopped without resetting, the chronograph
hands may rarely shift from the 12:00 position after 12 hours have elapsed.
<When Resuming Timing after 12 Hours have Elapsed>
• When timing has continued for 12 hours, timing is stopped automatically and each of the
chronograph hands stops at 12:00. In this case, always make sure to reset the chronograph
before additional timing since it is not reset to zero at this time.
[Reset Procedure]
1. Press button (A) to stop the chronograph.
2. Press button (B) to reset the chronograph.
• This resets the chronograph following 12 hours of timing. Timing can be resumed by
pressing button (A).
14
Note: Do not subject the watch to strong impacts while timing is in progress.
• The chronograph hands may rarely be shifted out of position if the watch is subjected
to a strong impact either while timing is in progress or after the chronograph has
stopped automatically after timing for 12 hours. In this case, reset the
chronograph by following the procedure described above. Promptly have your
watch repaired if any of the chronograph hands do not return to 12:00 even
if the reset procedure has been performed.
[When Chronograph Second Hand has
not been Properly Reset]
Chronograph hour hand
Chronograph minute hand
Chronograph
second hand
60
Button (A)
CHARGE
12
60
9
3
45
15
ON
OFF
Button (B)
120
15
Advertisement
Table of Contents
