Program Dial - Utax CD 1128 FAX Instruction Handbook Manual

Program Dial

You can register transmission requirements such as the other party to which you send originals and transmission
time as a program. After registration, you can recall transmission requirements only by pressing the program
number. Also, you can assign names to programs to make recalling programs easier and more convenient.
NOTE:
The copy function can be also registered to the program. Up to 4 programs including copying and
sending functions can be registered.
When user login has been enabled, only the administrator can register.
Registering Programs
Deleting Registration Contents
Using Program Dial
OPERATION GUIDE
All manuals and user guides at all-guides.com
1
2
3
4
1
2
3
4
1
2
NOTE:
up to change transmission requirements such as
changing the other party.
3
FAX Operation (Advanced)
With transmission requirements to be registered
are set, press the Program key and hold it (2
seconds). The program is registered to the key.
When you press a number where a program is
already registered, proceed to the next step.
Press the or key to select [Overwrite].
Press the OK key.
Press [Yes] (the Left Select key). The program is
registered, overwriting the previous one.
Press the Program key where a program you want
to delete is registered, and hold it (2 seconds).
Press the or key to select [Delete].
Press the OK key.
Press [Yes] (the Left Select key). The program is
deleted.
Press the Program key.
Place the originals.
You can also use the program you have called
Press the Start key. Transmission begins.
4
4-29