Table of Contents
Advertisement
Whirlpool EMEA S.p.A.
Via Carlo Pisacane n.1
20016 Pero (MI), Italy
VAT number: IT00693740425
www.hotpoint.co.uk
Your new cooker comes with 4 chrome shelf supports
packed in the main oven along with the shelves.
There are 2 shelf supports for the top oven and 2
for the bottom oven. See Fig. 1.
Fitting - Step 1
The top of the shelf supports engage in slots in the side
walls of the oven as in Fig. 2 below.
Note the rods 'A' are longer at the top than
'B' at the bottom, and the hooks 'C' are at the back of the
oven. It is important that the shelf supports
are fitted the correct way around!
24
Fitting - Step 2
Once engaged at the top, then push the bottom rods into
the lower slots in the oven side walls. Now allow
the shelf supports to lower slightly and engage. See Fig. 3.
This process should be repeated and all 4 shelf supports
fitted in the top and main ovens.
Fitting - Step 3
The shelves can now be fitted into the shelf supports
at the required heights. Note that there is pan guard
that should be at the back of the oven as shown. See Fig. 4.
Your ovens are now ready to use !
09/2021 -
W11465836
W11465836
XEROX FABRIANO
'D'
Advertisement
Table of Contents
