Customizing The Battery Saver Feature; Changing The Power Mode; Customizing Power Modes; Restoring A Power Mode - Garmin EPIX GEN 2 PRO Owner's Manual

Customizing the Battery Saver Feature

The battery saver feature allows you to quickly adjust system settings to extend battery life in watch mode.
You can turn on the battery saver feature from the controls menu
1 Hold MENU.
2 Select Power Manager > Battery Saver.
3 Select Status to turn on the battery saver feature.
4 Select Edit, and select an option:
• Select Watch Face to enable a low-power watch face that updates once per minute.
• Select Music to disable listening to music from your watch.
• Select Phone to disconnect your paired phone.
• Select Wi-Fi to disconnect from a Wi‑Fi network.
• Select Wrist Heart Rate to turn off the wrist heart rate monitor.
• Select Pulse Oximeter to turn off the pulse oximeter sensor.
• Select Always On Display to turn off the screen when not in use.
• Select Brightness to reduce the screen brightness.
The watch displays the hours of battery life gained with each setting change.
5 Select Low Battery Alert to receive an alert when the battery power is low.

Changing the Power Mode

You can change the power mode to extend battery life during an activity.
1 During an activity, hold MENU.
2 Select Power Mode.
3 Select an option.
The watch displays the hours of battery life available with the selected power mode.

Customizing Power Modes

Your device comes preloaded with several power modes, allowing you to quickly adjust system settings, activity
settings, and GPS settings to extend battery life during an activity. You can customize existing power modes
and create new custom power modes.
1 Hold MENU.
2 Select Power Manager > Power Modes.
3 Select an option:
• Select a power mode to customize.
• Select Add New to create a custom power mode.
4 If necessary, enter a custom name.
5 Select an option to customize specific power mode settings.
For example, you can change the GPS setting or disconnect your paired phone.
The watch displays the hours of battery life gained with each setting change.
6 If necessary, select Done to save and use the custom power mode.

Restoring a Power Mode

You can reset a preloaded power mode to the factory default settings.
1 Hold MENU.
2 Select Power Manager > Power Modes.
3 Select a preloaded power mode.
4 Select Restore > Yes.
116
(Controls, page 72).
Power Manager Settings