Nikon D2H User Manual page 250

Replacing the Focusing Screen
The D2H is supplied with type B BriteView focusing screen. An optional type
E clear-matte Fresnel screen is available for tracing and architectural photog-
raphy ( 232). To change focusing screens:
1
Turn the camera off and remove the lens.
2
Using the tweezers supplied with the focusing
screen, pull the focusing screen latch towards
you. The screen holder will spring open.
3
Remove the existing screen, using the sup-
plied tweezers and being careful to handle the
screen by the tab to avoid scratches.
4
Using the tweezers and handling the screen
by the tab, set the replacement screen in the
holder.
5
Push the front edge of holder upward until it
clicks into place.
Replacing Focusing Screens
Do not touch the surface of the mirror or focusing screens.
Focusing Screens
Use only screens designated for use in the D2H.
238