Nikon D2H User Manual page 195

Highlight b1 ISO auto in the second level of the CSM menu (
press the multi selector to the right. Press the multi selector up or down to
highlight an option, then press to the right to make a selection.
Option
Off Sensitivity remains fi xed at value selected by user, regardless of whether
(default) optimal exposure can be achieved at current ex po sure settings.
When optimal exposure can not be achieved at sensitivity selected by user,
sen si tiv i ty is adjusted to compensate, to min i mum ap prox i mate ly equiv-
On
a lent to ISO 200 and max i mum ap prox i mate ly equiv a lent to ISO 1600.
Sensitivity can not be set to HI-1 or HI-2 while this option is in effect.
When On is selected, the rear control-
panel display shows ISO-AUTO. ISO-A
appears in the viewfi nder sidebar.
Custom Setting b2: ISO Step Value
This option determines whether adjustments to
sensitivity (ISO equivalency) are made in incre-
ments equivalent to
option), ½ EV (1/2 step), or 1 EV (1 step). High-
light b2 ISO step value in the second level of the
CSM menu ( 171) and press the multi selector
to the right. Press the multi selector up or down
to highlight an option, then press to the right to
make a selection.
Bank Select
If a shooting menu bank in which ISO has been set to
On is selected for Custom Setting b1, sensitivity (ISO equivalency) will not be ad just ed
automatically. Sensitivity will also not be ad just ed automatically if a Custom Set tings
bank in which On is selected for Custom Setting b1 is chosen after ISO has been set
to or .
C Mode
H
When Custom Setting b1 (ISO auto) is on and sensitivity is altered from the value se-
lected by the user, the maximum shooting speed in C
is seven frames per second.
Description
1 3 EV (1/3 step, the default
CSM MENU
b2 ISO step value
1/3 step
1/2 step
1 step
or is chosen after
(continuous high-speed) mode
H
171) and
OK
183