Nikon D2H User Manual page 194

Custom Setting a8: Vertical AF-ON
This option determines what functions are as-
signed to the AF-ON button for vertical shooting.
Highlight a8 Vertical AF-ON in the second level
of the CSM menu (
selector to the right. Press the multi selector up
or down to highlight an option, then press to the
right to make a selection.
Option
AF-ON+ Pressing vertical AF-ON button initiates autofocus. Focus area can
Focus area be selected by pressing vertical AF-ON button and rotating sub-
(default) command dial.
AF-ON Pressing vertical AF-ON button initiates autofocus.
Pressing vertical AF-ON button locks focus and exposure. Focus
AE/AF-L+
area can be selected by pressing vertical AF-ON button and rotat-
Focus area
ing sub-command dial.
AE/AF-L Pressing vertical AF-ON button locks focus and exposure.
Vertical AF-ON button controls focus-area selection only. Focus
area can be selected by pressing vertical AF-ON button and rotat-
Focus area
ing sub-command dial.
Custom Setting b1: ISO Auto
If On is selected for this option, the cam era will
au to mat i cal ly adjust sensitivity (ISO equiv a len cy)
if the limits of the camera exposure system are
exceeded at the sensitivity selected by the user
(exposure modes P, S, and A) or if optimal expo-
sure can not be achieved at the shutter speed and
aperture selected in manual exposure mode. If
sensitivity is set to HI-1 (approximately equivalent to ISO 3200) or HI-2 (ap-
proximately equivalent to ISO 6400), this op tion is au to mat i cal ly set to Off
and can not be ad just ed.
Noise
Noise is more likely to appear in photographs taken at higher sensitivities.
182
171) and press the multi
a8 Vertical AF-ON button
function
Description
b1 ISO auto Control
OFF
ON
CSM MENU
AF-ON + Focus
areaOK
AF-ON
AE/AF-L + Focus area
AE/AF-L
Focus area
CSM MENU
Off OK
On