Remove The Camera Assembly Or The Lcd & Camera Cable - Lenovo N22–20 Hardware Maintenance Manual

Table 9. Screw specifications — removing the LCD panel
Number
Screw
location
4
LCD
panel
to
base
cover
Step 2. Check the back side of the LCD panel for the LCD connector and then unplug the LCD cable
Figure 22. Disconnect the LCD cable from the back of the LCD panel
Step 3. Remove the LCD panel.
Refer to Table 13 "Part numbers for LCD FRUs" on page 44 to look up the Lenovo part numbers for
replacement LCD panels.
Remove the camera assembly or the LCD & camera cable
Make sure the following FRUs (or CRUs) have been removed.
"Remove the LCD bezel" on page 33
"Remove the LCD panel" on page 35
Step 1. Tear the camera mylar off the camera assembly
Figure 23. Tear off mylar
Step 2. Remove the two screws.
36
Hardware Maintenance Manual
Specifications
M2 × 2.5 mm, flat-head, nylon-coated
Color
Silvery
2 .
Torque
1.7 — 2.0 kgf *
cm
3 .