Hdmi Cec; Hdmi Cec Connection Functions Of The Television - Grundig 65 GDU 7500B User Manual

USING­EXTERNAL­DEVICES
HDMI­CEC
Your television is equipped
with HDMI CEC feature. This
feature utilizes CEC (Consumer
Electronics Control) protocol.
CEC allows you to make an
HDMI connection between your TV and DVD
player, STB or video recorder and control
such equipment with the remote control of the
television. This feature must be supported by the
device you connect as well.
Your television supports the following functions.
For detailed information about this function,
read the user manual of the external device.
HDMI­CEC­connection­functions­
of­the­television
Switching­on­the­external­device­from­
standby­mode
If you switch on your external device (e.g. DVD
player) from standby mode, your television will
also be switched on from standby and switch
to the HDMI source that your television is
connected to.
Depending on the features of the external
device (e.g. AV receiver) can start and your
television can stay on stand-by mode.
Selecting­the­HDMI­source­from­the­
television
When you switch on your external device
(e.g. DVD player), your television will switch
to the HDMI source that the external device is
connected to (your television must be on).
Selecting­the­menu­language
When you select the menu language from
your television menu language of the external
device will change as well. (If your DVD player
supports)
­ - --------------------------------------------------------------
Switching­off­the­device­from­standby­
mode
After switching your television to standby, your
external device (e.g. DVD player) will also
switch to standby if it is on.
Refer to the user manual of your external device
to learn how to activate this feature on it.
Searching­and­selecting­the­active­
external­device
1­ Press »MENU« to open the menu.
2­
Press » « or »
V Λ
»Preferences« menu and press »OK« to
confirm.
3­ Press » « or »
V Λ
and press »OK« to confirm.
< >
4­
Use » « or » « to set »HDMI Link« to
»On«.
5­
Press » « or »
V Λ
List« and press »OK« to confirm.
– E xisting devices will be searched and
displayed in the menu
6­
Press » « or »
V Λ
want to control and press »OK« to confirm.
7­
Press »BACK
<
menu or press »EXIT« to end the setting.
« to select the
« to select »HDMI Link«
« to select the »Device
« to select the device you
« to return to the previous
ENGLISH
55­