Picture Settings - Grundig 65 GDU 7500B User Manual

PICTURE­/­SOUND­SETTINGS
Picture­settings­
1­
Open the menu with »MENU«.
2­ Press » « or »
V Λ
>
and press » « to confirm.
– »Picture« menu is now active.
Picture
Picture Mode
Standart
Vibrant Colour
On
Color Temperature
Normal
Dynamic Contrast
On
Noise Reduction
Low
Block Noise Reduction
Low
Microdimming
Off
Film Mode
On
Color Management System
Off
3­
Select the required line/function with »
or » « and press »OK« to confirm.
Λ
Select the option with »
»BACK « to return to »Picture Settings«
<
menu.
4­ Press »EXIT« to finish the setting.
24­ ENGLISH
« to select »Picture« menu
V
< >
« or » « and press
­---------------------------------------------------------
Enhanced­picture­settings­
The "enhanced picture settings" are in principal
digital image improvements which, however,
should be only used when necessary when
picture quality and transmission is excellent.
They may well improve the display with poor
material, but may adversely affect the display
where transmission and picture quality are
excellent.
»Vibrant Colour« – Increases the colour
7
contrast and the contrast adjustment. This
setting is mostly too strong for use with
normal pictures and should only be used
where necessary (low or off) otherwise
nuances in the image can be suppressed.
»Dynamic Contrast« – The function
7
dynamically and optimally adjusts the
contrast for the respective picture content
by analysing images and then altering this
depending in a change in contrast. This
increase in the contrast however, may also
reduce the visible brightness levels in the
picture.
»Noise Reduction« – Reduces the visible
7
"snow" by displaying the picture a little less
«
sharply and creating a slight blurring. Thus,
it must be used as little as possible with
good picture material.
»Block Noise Reduction« – This function
7
can only be selected with digital reception
sources and AV presets. It reduces any
interference from artefacts (pixel blocks)
from digital programmes due to MPEG
compression (such as from DVB-T receivers
and lower transmission rates or DVD
players).
»Film mode« detects and processes feature
7
films automatically for all channel sources.
This means you will always receive an
optimal picture.
T his functions in the modi 480i, 576i
and 1080i in TV playback and for other
channel sources.
I f the »Film mode« is switched on for
programmes without a feature film signal,
minor problems such as picture freeze,
defective subtitles or fine lines in the picture
could occur.