Table of Contents
Advertisement
USBRECORDING
"Pausing"thetimeshift
programmes
You can pause any programme you are
watching. This is a useful function. For instance,
if the phone rings when you are watching a
movie, you can pause the movie and resume it
after the call without missing nothing.
The last scene that was frozen is displayed and
time shift is recorded into the external data
media.
In Timeshift mode, you can only record as much
as the free memory space you have set on the
external data medium.
Note:
Use an external USB Hard Disk for an
7
uninterrupted "Permanent Time Shift".
1
Press »
« during the broadcast.
!
– T elevision picture is paused and delay
time is displayed.
2
To resume the broadcast, press »
– T he system continues recording the
broadcast while you are watching it.
Note:
The following functions can be used in the
7
Time Shift mode.
– Fast rewind, press »
the desired speed;
– Fast forward, press »
the desired speed;
– To pause, press »
3
Press »
« to quit the Timeshift function.
7
4
To stop the timeshift, press »
»Yes«;
or
to continue the timeshift, press »
»No«.
38
ENGLISH
-------------------------------------------------------------------------------------------
«.
8
«several times for
3
« several times for
4
«.
!
<
« to select
>
« to select
Recordingprogrammes
You can record a TV channel. Programmes are
recorded onto the external data media and the
archive is managed via television.
A memory of 44 MB up to 110 MB is required
for a 1 minute record.
Recordingprogramswithonetouch
1
Select the channel with »1...0« or »P+«,
»P–« and press »
– R ecording information will be displayed:
Recording symbol, channel name,
programme time and recording time.
– T hese information will disappear after a
short time.
2
Press »
« to end recording.
7
3
To stop recording, press »
or
to continue the recording, press »
select »No«.
Notes:
When recording is complete, it will
7
automatically be stored on the external
data media.
If you remove the external data media
7
during recording, then the recording is
cancelled automatically and no data is
recorded onto the external data media.
SwitchingtheTVtostand-byduring
recording
1
Select the channel you want to record and
press »
« to start recording.
2
To switch the TV to stand-by, press »
3
To continue recording and switch to stand-
<
by, press »
«;
or
to end recording and switch the TV to stand-
>
by, press »
«.
« to start recording.
<
« to select »Yes«;
>
« to
8
«.
Advertisement
Table of Contents
