Hdmi Cec; Hdmi Cec Connection Functions Of The Television - Grundig 32 VLE 4820 User Manual

USING­EXTERNAL­DEVICES
HDMI­CEC
Your television is equipped with HDMI CEC
feature. This feature utilizes CEC (Consumer
Electronics Control) protocol. CEC allows you
to make an HDMI connection between your TV
and DVD player, STB or video recorder and
control such equipment with the remote control
of the television. This feature must be supported
by the device you connect as well.
Your television supports the following functions.
For detailed information about this function,
read the user manual of the external device.
HDMI­CEC­connection­functions­
of­the­television
Switching­on­the­external­device­from­
standby­mode
If you switch on your external device (e.g. DVD
player) from standby mode, your television will
also be switched on from standby and switch
to the HDMI source that your television is
connected to.
Depending on the features of the external
device (e.g. AV receiver) can start and your
television can stay on stand-by mode.
Selecting­the­HDMI­source­from­the­
television
When you switch on your external device
(e.g. DVD player), your television will switch
to the HDMI source that the external device is
connected to (your television must be on).
Selecting­the­menu­language
When you select the menu language from
your television menu language of the external
device will change as well. (If your DVD player
supports)
38­ ENGLISH
­ - --------------------------------------------------------------
Switching­off­the­device­from­standby­
mode
After switching your television to standby, your
external device (e.g. DVD player) will also
switch to standby if it is on.
HDMI CEC is always active on your television.
Refer to the user manual of your external device
to learn how to activate this feature on it.
Searching­and­selecting­the­active­
external­device
1­
Press »MENU« to open the menu.
2­
Select the »SETUP« menu using »
and confirm your selection with »OK«.
– T he »SETUP« menu is now enabled.
SETUP
Move Back
3­
Press » « or »
V Λ
and press »OK« to confirm.
< >
4­ Use » « or » « to switch »CEC Control« to
»On« position.
– T he »HDMI CEC« menu is now enabled.
5­
Press » « or »
V Λ
List« and press »OK« to confirm.
– E xisting devices will be searched and
displayed in the menu
6­ Press » « or »
V Λ
want to control and press »OK« to confirm.
7­
Press »EXIT« to end searching.
<
« or »
Menu Language English
TT Language English
Audio Languages English
Subtitle Language English
Hearing Impaired Off
PVR File System
Aspect Ratio 16:9
Blue Screen On
First Time Installation
Reset
Software Update (USB)

HDMI CEC

Software Version
Select Exit
« to select »HDMI CEC«
« to select the »Device
« to select the device you
>
«