Driver Assistance Systems; Rear Vision Camera (Rvc) - Chevrolet Silverado 4500HD 2022 Manual

224 Driving and Operating
previous set cruise speed. While pressing the
accelerator pedal or shortly following the
release to override cruise control, briefly
pressing SET will result in cruise control set
to the current vehicle speed.
Using Cruise Control on Hills
How well the cruise control works on hills
depends on the vehicle speed, the load, and
the steepness of the hills. When going up
steep hills, pressing the accelerator pedal
may be necessary to maintain vehicle speed.
While going downhill, the transmission may
downshift in order to use engine braking to
slow the vehicle and maintain the set speed.
You may have to brake or shift to a lower
gear to keep your speed down. If the brake
pedal is pressed, cruise control disengages.
Ending Cruise Control
There are four ways to end cruise control:
Step lightly on the brake pedal.
Press .
Shift the transmission to N (Neutral).
To turn off cruise control, press
Erasing Speed Memory
The cruise control set speed is erased from
memory if is pressed or the ignition is
turned off.

Driver Assistance Systems

Rear Vision Camera (RVC)

When the vehicle is shifted into R (Reverse),
the Rear Vision Camera (RVC) displays an
image of the area behind the vehicle in the
infotainment display. The previous screen
displays when the vehicle is shifted out of
R (Reverse) after a short delay. To return to
the previous screen sooner, press Home or
Back on the infotainment system, shift into
P (Park), or reach a vehicle speed of
approximately 12 km/h (8 mph) while in
D (Drive).
.
1. View Displayed by the Rear Vision
Camera
1. View Displayed by the Rear Vision
Camera
2. Corners of the Rear Bumper