First Operation; Installation; Right Place For Installation - Beko BT3103IS User Manual

6 First Operation

Remove the protective foil and adhesive ad-
vertising label if available in your product.
However, please do not remove the
labels (e.g. type label) that appear
after the lid is opened.

7 Installation

Read the "Safety Instructions" first.
Before consulting the nearest Authorized
Service for installing the drying machine,
see the information in the user guide and
make sure the electric and water utilities
are as required. If it is not suitable for in-
stallation, call a qualified electrician and
plumber to make the necessary arrange-
ments.
It is customer's responsibility to prepare
the location the drying machine shall be
placed on and also have power and waste
water installation prepared.
Check for any damages on the dry-
ing machine before installing it. If
drying machine is damaged, do not
get it installed. Damaged products
cause a risk for your safety. Wait
for 12 hours before operating your
dryer after initial installation.

7.1 Right Place for Installation

NOTE: The product includes a cooling
agent and if the product is operated right
after it is transported, it may get damaged.
After each time the product is moved, it
shall be left to rest for 12 hours.
• Install the drying machine on a flat and
stable surface.
• Dryer machine is heavy. Do not move it
by yourself.
• Operate the drying machine in an environ-
ment free of dust with good ventilation.
After the device is installed
• operate the machine for the first time ac-
cording to user's manual.
• The gap between the drying machine and
the floor should not be reduced via ma-
terials such as rugs, pieces of wood and
bands.
• Do not block the ventilation grilles of the
drying machine.
• There shall not be doors that can be
locked, sliding doors or hinged doors
near the installation environment of the
drying machine that may block the load-
ing door to be opened.
• Once the drying machine is installed, the
connections must stay stable. While pla-
cing the drying machine, ensure that the
back wall does not come in contact with
any extrusion (a water tap, electrical out-
let etc.).
• Place the drying machine with at least 1
cm space between the product and the
furniture edges.
• Your drying machine is suitable to be op-
erated between +5 °C and +35 °C. If oper-
ated outside this temperature range, your
drying machine's operation may be com-
promised and get damaged.
• The drying machine should be placed
with the back side facing a wall.
Do not place the drying machine on
its power cord.
EN / 50