BenQ RP6504 User Manual page 34

Hide thumbs Also See for RP6504:
Table of Contents

Advertisement

PN: 4J.F8203.102 V 3.00
11/07/2022
Safety warnings and precautions
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated "dangerous voltage"
within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric
shock to persons.
The exclamation point within an equilateral triangle
is intended to alert the user to the presence of
important operating and maintenance (servicing)
instructions in the literature accompanying the
appliance.
• The mains plug of the power supply cord shall remain readily operable. The AC receptacle (mains socket
outlet) shall be installed near the equipment and shall be easily accessible. To completely disconnect
this equipment from the AC mains, disconnect the power cord plug from the AC receptacle.
• Do not place this display on an uneven, sloping or unstable surface (such as a trolley) where it may fall
and cause damage to itself or others.
• Do not place this display near water, like a spa or pool, or in a position which will allow the splashing or
spraying of water onto the display, like in front of an open window where rain water may enter.
• Do not install this display in a confined space without proper ventilation and air circulation, such as in a
closed cabinet. Allow proper space around the display for dissipating heat inside. Do not block any
openings and vents on the display. Overheating may result in hazards and electric shock.
• Installation of this display should only be performed by a qualified technician. Failure to install this
display properly may cause injuries and damages to the personnels and the display itself. Check the
installation regularly and maintain the display periodically to ensure the best working condition.
• Use only the accessories approved or recommended by the manufacturer to mount this display. Using
wrong or unsuitable accessories may cause the display to fall and result in serious personal injuries.
Make sure that the surface and fixing points are strong enough to sustain the weight of the display.
• To reduce the risk of electric shock, do not remove covers. No user serviceable parts inside. Refer
servicing to qualified service personnel.
• To prevent personal injuries, mounting the display or installing desktop stands is required before use.
• Please confirm the distribution system in building installation shall provide the circuit breaker rated
120/240V, 20A (maximum).
Caution for models with batteries:
• Replacement of a battery with an incorrect type that can defeat a safeguard;
• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can
result in an explosion;
• Leaving a battery in an extremely high temperature surrounding environment that can result in an
explosion or the leakage of flammable liquid or gas;
• A battery subjected to extremely low air pressure that may result in an explosion or the leakage of
flammable liquid or gas.
• Risk of fire or explosion if the battery is replaced by an incorrect type.
Notice
This product is also designed for IT power system with phase to phase voltage 230.
THIS EQUIPMENT MUST BE
GROUNDED
To ensure safe operation, the three-pin
plug must be inserted only into a
standard three-pin power outlet which
is effectively grounded through normal
household wiring. Extension cords
used with the equipment must have
three cores and be correctly wired to
provide connection to the ground.
Wrongly wired extension cords are a
major cause of fatalities.
The fact that the equipment operates
satisfactorily does not imply that the
power outlet is grounded or that the
installation is completely safe. For your
safety, if you are in any doubt about the
effective grounding of the power outlet,
please consult a qualified electrician.
1
English

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rp7504Rp8604

Table of Contents