Brother MFC8440D Service Manual page 142

7/13/2019
NOTE:
When re-assembling the paper eject actuator and the eject actuator spring to the FU frame
lower, ensure the paper eject actuator is seated correctly in the locating channel referring to
the figure below;
(28) Disconnect the heater harness.
(29) Remove the four cup B M3x6 Taptite screws.
(30) Remove the four claw holder plate.
(31) Remove the four separate claw ASSY.
Claw holder plate
Separate claw ASSY
Heater harness
http://slidepdf.com/reader/full/brother-8840d-service-manual
Brother 8840D Service Manual
Paper eject actuator
Fig. 4-110
Taptite, cup B M3x6
Fig. 4-111
4-61
MFC-8440/8840D/8840DN, DCP-8040/8045D/8045DN
FU frame lower
Eject actuator spring
Separate claw ASSY
Tweezers
SERVICE MANUAL
142/361