7/13/2019
(14) Disconnect the four connectors.
(15) Remove the cup S M3x6 Taptite screw, and then remove the ground wire.
(16) Remove the four cup B M3x10 Taptite screws, and then remove the ADF chute ASSY.
ADF motor
Connector
ADF relay PCB ASSY
Connector
Ground wire
(17) Remove the conductive bushing, and then remove the PF roller holder ASSY.
(18) Remove the conductive bushing, and then remove the LF roller 1 ASSY.
LF roller 1 ASSY
ADF chute ASSY
http://slidepdf.com/reader/full/brother-8840d-service-manual
Brother 8840D Service Manual
Taptite, cup S M3x6
Document cover LGL
Fig. 4-38
Fig. 4-39
4-23
MFC-8440/8840D/8840DN, DCP-8040/8045D/8045DN
Taptite, cup B M3x10
ADF chute ASSY
PF roller holder ASSY
Conductive bushing
Conductive bushings
SERVICE MANUAL
Taptite, cup B M3x10
1
2
1
104/361