Advertisement
Step 4
A17 ctr
(4)
The door track assembly supports the
sliding doors and reinforces the front
wall. It is made up of three pieces.
1
Using the door track splice,
(painted), join the door track
(galvanized) pieces end-to-end as
shown.
2
Insert four screws from the
underside only.
Hint: The holes in the top side of the
door track assembly are for fastening
the gable to the top of the front wall
in a later step.
3
Position door slides onto the
legs, from the end of door track
assembly, as shown in the end view.
4
Set this piece aside for later use.
9366
Parts Needed For
Door Track Assembly
6403
Painted Part
STEP
4
118 1/8"
300,0 cm
66769
118 1/8"
300,0 cm
NOTE:
Door Track Splice (painted part)
6403
9366
9366
STEP
STEP
1
2
Long Leg
on top.
STEP
3
Door Slide
14
6403 Door Track Splice (1)
9366 Door Track (2)
66769
Long Leg
on Top
Short Leg
on Bottom
END VIEW
CORRECT
INCORRECT
9366
Advertisement
