Optoma ZK400 User Manual page 31

USING THE PROJECTOR
‡ Film: For home theater.
Video: For video or TV source.
‡
Graphics: For PC / Photo source.
‡
‡ Standard(2.2): For standardized setting.
‡ 1.8 / 2.0 / 2.4: For specific PC / Photo source. 2.4 can also be used for video content and games to
enable deeper contrast.
Note:
These options are only available if the 3D mode function is disabled.
Color Settings
Configure the color settings.
‡ BrilliantColor™: This adjustable item utilizes a new color-processing algorithm and enhancements to
enable higher brightness while providing true, more vibrant colors in picture.
‡ Color Temp.: Select a color temperature from Warm, Standard, Cool, and Cold.
‡ Color Matching: Select the following options:
± Color: Adjust the red (R), green (G), blue (B), cyan (C), yellow (Y), magenta (M), and white (W)
level of the image.
± Hue: Adjust the color balance of red and green.
± Saturation: Adjust a video image from black and white to fully saturated color.
± Gain: Adjust the image brightness.
± Reset: Return the factory default settings for color matching.
± Exit: Exit the "Color Matching" menu.
‡ RGB Gain/Bias: This settings allows to configure the brightness (gain) and contrast (bias) of an
image.
± Reset: Return the factory default settings for RGB gain/bias.
± Exit: Exit the "RGB Gain/Bias" menu.
‡ Color Space (HDMI1 only): Select an appropriate color matrix type from the following: Auto,
RGB (0-255), RGB (16-235), and YUV.
‡ Color Space (HDMI2/Component only): Select an appropriate color matrix type from the following:
Auto, RGB (0-255), and RGB (16-235).
Note:
Color Space function is not supported if the source is HDMI3.
Brightness Mode
Manually choose the power percentage for brightness mode and adjust the brightness mode settings.
‡ DynamicBlack: Use to automatically adjust the picture brightness in order to give optimum contrast
performance.
‡ Eco.: Choose "Eco." to dim the projector laser diode which will lower power consumption and extend
the laser diode life.
Constant Power: Choose the power percentage for brightness mode.
‡
‡ Constant Luminance: Constant Luminance varies the strength of LD luminance such that the
brightness maintains consistent with time.
Reset
Return the factory default settings for color settings.
31
English