Teac Reference DR-H300 Owner's Manual page 45

Teac reference dr-h300: user guide
Hide thumbs Also See for Reference DR-H300:
Table of Contents

Advertisement

Available languages

Available languages

Tuner
Cannot listen to any station, or signal is too weak.
e Tune in the station properly.
e Rotate the FM or AM antenna for the best reception
position.
Though the broadcast is stereo, it sounds monaural.
e Press the STEREO/MONO button.
If normal operation cannot be obtained, unplug the power
cord from the outlet and plug it again. This resets the
internal micro-computer which can be disturbed during
electrical storms, power interruptions, et cetera.
If unplugging the power cord does not solve the proble, try the
following procedure to reset the internal micro-computer.
1. Turn the unit on.
2. Press the STOP button while holding down the
PLAY/PAUSE button.
3. Release the STOP button when "DR-H300V**" appears
on the display.
4. Release the PLAY/PAUSE button.
5. Press the STOP button.
Beware of condensation
When the unit (or a disc) is moved from a cold to a warm
place, or used after a sudden temperature change, there is a
danger of condensation; vapor in the air could condense on
the internal mechanism, making correct operation impossible.
To prevent this, or if this occurs, leave the unit turned on for
one or two hours. Then the unit will stabilize at the
temperature of its surroundings.
Maintenance
If the surface of the unit gets dirty, wipe with a soft cloth or
use diluted neutral cleaning liquid. Be sure to remove any
fluid completely. Do not use thinner, benzine or alcohol as
they may damage the surface of the unit.
45

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents