Table of Contents
Advertisement
Paper handling
Single sheets
16
Make sure that the printer is set to single sheet mode. If necess-
ary, change the paper type (see page 13, Paper path quick
selection).
Press the latch at the middle of the front cover. The single sheet
input tray opens downwards.
Install the paper support as required for the paper
width. You can use an additional paper support in
order to position wide single sheets properly (see
Accessories, page 24).
Align the left paper guide with the mark on the left of the single
sheet input tray. Adjust the right paper guide to the width of the
paper used.
Insert the single sheet into the input tray as far as possible.
Press the Online key to set the printer to ready status.
The sheet is automatically loaded when the printer is in online
mode and receives data from the computer. Press the Load (4)
key to load paper before starting the printout.
Quick Start-up
Advertisement
Table of Contents
