Table of Contents
Advertisement
Paper handling
Loading paper
Your printer can print both fanfold paper and single sheets. For information on the paper sizes
you can use, please refer to page 24 (Paper specifications).
You should only use those paper types which are approved for this printer. For more information,
refer to the reference manual on the online CD-ROM.
Fanfold paper
14
Make sure that the printer is set for fanfold paper printing. If
necessary, change the paper type (see page 13, Paper path quick
selection).
Raise the front cover, taking it by the areas marked with arrows
on the left and right.
Open the right and left tractor flaps.
You may also want to remove the bottom cover in order to
facilitate loading the fanfold paper. However, you can also feed
paper to the tractor with the bottom cover mounted.
First insert fanfold paper into the left-hand tractor. Make sure
that at least three paper transport holes are positioned on the
tractor pins. Close the left tractor flap.
Open the coloured latch lever and align the tractor so that the
first printing position on the paper matches the X mark on the
printer housing.
Lock the lever again.
Quick Start-up
Advertisement
Table of Contents
