Device Care; Cleaning The Device; Troubleshooting; Resetting The Device - Garmin Edge Explore 1000 Owner's Manual

Device Care

Do not store the device where prolonged exposure to extreme
temperatures can occur, because it can cause permanent
damage.
Never use a hard or sharp object to operate the touchscreen, or
damage may result.
Avoid chemical cleaners, solvents, and insect repellents that can
damage plastic components and finishes.
Secure the weather cap tightly to prevent damage to the USB
port.

Cleaning the Device

1
Wipe the device using a cloth dampened with a mild
detergent solution.
2
Wipe it dry.

Troubleshooting

Resetting the Device

If the device stops responding, you may need to reset it. This
does not erase any of your data or settings.
1
Hold for 10 seconds.
2
Hold for one second to turn on the device.

Clearing User Data

You can restore all of the device settings to the factory default
values.
NOTE: This deletes all user-entered information, but it does not
delete your history.
Select > System > Device Reset > Factory Reset >

Saving Energy While Charging the Device

You can turn off the device screen and all other features while
charging.
1 Connect your device to an external power source.
2
Hold for 4 to 5 seconds.
The screen turns off, and the device goes into a low power,
battery charging mode.
3
Charge the device completely.

Maximizing Battery Life

• Decrease the backlight or shorten the backlight timeout
(Using the Backlight, page
• Turn on the Auto Sleep feature
• Turn off the Bluetooth wireless feature
page 10).
• Turn off wireless connectivity

Updating the Software

Before you can update your device software, you must have a
Garmin Connect account, and you must download the Garmin
Express application.
1
Connect the device to your computer using the USB cable.
When new software is available, Garmin Express sends it to
your device.
2
Follow the on-screen instructions.
3
Do not disconnect your device from the computer during the
update process.
NOTE: If you have already used Garmin Express to set up
your device with Wi‑Fi connectivity, Garmin Connect can
Troubleshooting
NOTICE
2).
(Using Auto Sleep, page
(Bluetooth Settings,
‑ Fi Settings, page
(Wi 10).
automatically download available software updates to your
device when it connects using Wi‑Fi.

Support and Updates

Garmin Express (www.garmin.com/express) provides easy
access to these services for Garmin devices.
• Product registration
• Product manuals
• Software updates
• Data uploads to Garmin Connect
• Map, chart, or course updates

Getting More Information

• Go to www.garmin.com/intosports.
• Go to www.garmin.com/learningcenter.
• Go to http://buy.garmin.com, or contact your Garmin dealer
for information about optional accessories and replacement
parts.

Getting the Owner's Manual

You can get the most recent owner's manual from the web.
1
Go to www.garmin.com/manuals/edgeexplore1000.
2 View or download the full owner's manual in your preferred
format.

Viewing Device Information

You can view the unit ID, software version, and license
agreement.
Select > System > About.

Improving GPS Satellite Reception

.
• Frequently sync the device to your Garmin Connect account:
◦ Connect your device to a computer using the USB cable
and the Garmin Express application.
◦ Sync your device to the Garmin Connect Mobile app using
your Bluetooth enabled smartphone.
◦ Connect your device to your Garmin Connect account
using a Wi‑Fi wireless network.
While connected to your Garmin Connect account, the device
downloads several days of satellite data, allowing it to quickly
locate satellite signals.
• Take your device outside to an open area away from tall
buildings and trees.
• Remain stationary for a few minutes.
11).

Temperature Readings

The device may display temperature readings that are higher
than the actual air temperature if the device is placed in direct
sunlight, held in your hand, or is charging with an external
battery pack. Also, the device will take some time to adjust to
significant changes in temperature.

Replacement O-rings

Replacement bands (O-rings) are available for the standard
mount in two sizes:
• 1.3 × 1.5 × 0.9 in. AS568-125
• 1.7 × 1.9 × 0.9 in. AS568-131
NOTE: Use Ethylene Propylene Diene Monomer (EPDM)
replacement bands only. Go to http://buy.garmin.com, or contact
your Garmin dealer.
13