Selecting The Station To Program; Selecting The Program Mode; Selecting The Progam Schedule - Toro Intelli-Sense TIS-612 User Manual

Selecting the Station to Program

Turn the Function Selector knob to PROGRAM to view the
1.
following display:
SET STA TO PROGRAM
STA 01
Station 1 is automatically selected. To change the station number,
2.
turn the Lower Line knob.
Note: The number of active stations defined in the Setup function,
determines the number of stations that can be selected.

Selecting the Program Mode

1. W ithin the Program menu, turn the Upper Line knob to view
the following display:
SET PROGRAM MODE STA 01
Fully Automated
The Fully Automated mode is selected by default. If it is not
2.
displayed, turn the Lower Line knob to select this mode.
Selecting the Program Schedule
1. Within the PROGRAM menu, turn the Upper Line knob to view
the following display:
SET SCHEDULE
Sch A
Automatic Schedule A is selected by default. To select Automatic
2.
Schedule B, turn the Lower Line knob.
22
Sch A
STA 01