†. Required filter sizes shown are based on the larger of the AHRI (Air Conditioning Heating and Refrigeration Institute) rated cooling airflow or the heating airflow velocity of 300
to 350 ft/minute for throwaway type. Air filter pressure drop for non-standard filters must not exceed 0.08 IN. W.C.
If using accessory filter rack refer to the filter rack installation instructions for correct filter sizes and quantity.
N/A= Not Available
Nominal
Internal
Iron Pipe
Diameter
Size (in.)
(in.)
1/2
.622
175
3/4
.824
360
1
1.049
680
1-1/4
1.380
1400
1-1/2
1.610
2100
*. Capacity of pipe in cu ft of gas per hr for gas pressure of 0.5 psig or less. Pressure drop of 0.5-IN. W.C. (based on a 0.60 specific gravity gas). Refer to
Gas Code NFPA 54/ANSI Z223.1.
†. This length includes an ordinary number of fittings
Manufacturer reserves the right to change, at any time, specifications and designs without notice and without obligations.
Comfort and performance 13 and 14 seer single packaged air conditioner and gas furnace system with puron (r-410a) refrigerant single and three phase 2 - 5 nominal tons (sizes 24 - 60) (11 pages)
Performance 14 seer single-packaged air conditioner and gas furnace system with puron (r-410a) refrigerant single and three phase 2-5 nominal tons (sizes 24-60) (57 pages)
Comfor and performance 13 and 14 seer single packaged air conditioner and gas furnace system with puron (r-410a) refrigerant single and three phase 2-5 nominal tons (sizes 24-60) (8 pages)
Ultra low nox 14 seer single-packaged air conditioner and gas furnace system with puron r-410a refrigerant, single/three phase 2-5/3-5 nominal tons sizes 24-60/36-60 (32 pages)
13.4 seer2 single-packaged air conditioner and gas furnace system with puron r-410a refrigerant, single/three phase 2-5/3-5 nominal tons, sizes 24-60/36-60 (50 pages)
15.2+ seer2 2-stage packaged air conditioner and single stage gas furnace system with puron (r-410a) refrigerant single and three phase 2-5 nominal tons (sizes 24-60) (10 pages)