Engine Cover Panel "Top": Removing And Installing - Volkswagen Passat 2015 Manual

Passat 2015 ➤, Passat 2019 ➤, Passat Variant 2015 ➤, Passat Variant 2019 ➤
4.36 Engine cover panel "top": removing
and installing
Engine cover panel: removing and installing, 1.5 l TSI engines
⇒ page 113
Engine cover panel, 1.8 l TSI engines and 2.0 l TSI engines:
removing and installing
Engine cover panel: removing and installing, common rail diesel
engines ⇒ page 115
4.36.1 Engine cover panel: removing and in‐
stalling, 1.5 l TSI engines
Removing
– Lift engine cover panel -1- off ball studs in the following
sequence.
– Pull engine cover panel -1- off ball studs -a- first.
– Then pull engine cover panel -1- off ball studs -b-.
Installing
Install in the reverse order of removal, observing the following:
Note
Moisten ball studs with water (without additive) prior to in‐
♦
stallation.
Check that the rubber buffers are seated correctly in the
♦
engine cover panel, and adjust if necessary.
Keep to the sequence during assembly.
♦
– Press engine cover panel -1- on ball studs -b-.
⇒ page 114
Maintenance - Edition 11.2020
4. Descriptions of work
113