Graco 234113 Operation page 13

5. Release spray gun trigger. Turn flow control to PRIME.
Circulate flushing fluid until pump suction hose and drain
hose are clean.
Direct gun into flushing container and turn flow control to
LOW/MED/HIGH and continue to flush until pump and line
are clear.
WARNING MISE EN GARDE
ADVERTENCIA ADVERTÊNCIA
6. Turn flow control OFF.
Turn engine OFF.
7. Wipe sprayer, hose and gun with a rag soaked in water or
mineral spirits.
For working psi, material compatibility, techinical data and more sprayer information see repair manual.
Pressure Relief
FLUSH
TI3072A
TI3078A
13
309663