Safety; Safety Instructions For Pneumatic Tools - Grizzly T23094 Owner's Manual

For Your Own Safety Read Instruction Manual
Before Operating This Equipment
The purpose of safety symbols is to attract your attention to possible hazard-
ous conditions. This manual uses a series of symbols and signal words which
are intended to convey the level of importance of the safety messages. The
progression of symbols is described below. Remember that safety messages by
themselves do not eliminate danger and are not a substitute for proper accident
prevention measures.
NOTICE

safety instructions for pneumatic tools

Keep all safety devices in place
and in working order.
remove adJusting
Wrenches. Form habit of checking to
see that keys and adjusting wrenches are
removed from tool before operation.
Keep WorK area clean. Cluttered
areas and benches invite accidents.
Keep children
aWay. All children and visitors should be
kept at a safe distance from work area.
maKe WorKshop child proof.
Make sure to lock your shop and shut-
OFF the power and air supply.
-2
-

safety

Indicates an imminent hazardous situation which, if
not avoided, WILL result in death or serious injury.
Indicates a potentially hazardous situation which, if
not avoided, COULD result in death or serious injury.
Indicates a potentially hazardous situation which, if
not avoided, MAY result in minor or moderate injury.
It may also be used to alert against unsafe practices.
This symbol is used to alert the user to useful infor-
mation about proper operation of the equipment.
Keys and
and visitors
Get other manuals https://www.bkmanuals.com
do not force tool. it will do the job
better and safer at the rate for which it was
designed.
use the right tool. do not force tool
or attachment to do a job for which it was
not designed.
do not use under the influence
of drugs or alcohol, or When
tired.
use correct air pressure.
exceeding the maximum psi rating
of this tool may cause seal damage,
unpredictable operation, or line burst.
Model t23094 pneumatic Metal shear