Grundig 32 VLE 6020 User Manual page 73

NETWORK­SETUP
Wireless­WPS­network­connection­with­
PIN
1­ Press » «.
>
2­ Press » « to select »Settings«.
>
3­
Press » « then »
V
and confirm with »
– » NETWORK« menu will be displayed.
4­ Press » « to select »Join Network Using
V
WPS (PIN)« and press »
– 8 -digit pin code is displayed in the
wireless WPS menu.
JOIN NETWORK USING WPS (PIN)
Cancel
Network
Notes:
Refer to the manual of your router to find
7
out how the PIN is entered via a PC.
The 8-digit PIN code must be entered in the
7
modem interface in 2 minutes; otherwise,
connection of television with the modem is
cut.
5­
Use a computer to enter PIN to the router
(e.g. AVM FRITZ!Box: menu item WLAN
Settings... WPS) and save.
– » Connected to Wi-Fi network
"Modem_1".« will be displayed and the
modem will be connected.
6­ In the »NETWORK« menu, press »
check status of the network connection.
– N etwork connection status will be
displayed.

7­
Press » « to return to the previous menu or
press » « to return to »Home« menu.
­ - ------------------------------------------------------------------------------------------
« to select »Network«
 «.
«.

Searching for Wi-Fi...
To connect to the Internet
using a WPS PIN, please enter
the following PIN on your
Wi-Fi router. This setup can
take up to two minutes.
61913271
8!
Auto­connection­by­inputting­the­
network­password
If your router does not support "WPS-PBC" or
WPS PIN entry, use this method to connect.
1­ Press »
>
2­ Press » « to select »Settings«.
3­
Press »
V
and confirm with »
– » NETWORK« menu will be displayed.
Network
4­ Press »
V
press »

– A vailable wireless networks will be
displayed in the »SEE ALL NETWORKS«
menu.
5­ Press »
V
want to connect to and confirm with »
– W ireless connection password screen will
be displayed.
6­
Select the required character with »
>
» «, » « or »
V
character with »
– Y ou can press »
uppercase and lowercase letters.
– Y ou can press »#$%« / »äçé« ➡ »
switch between special characters.
« to
– P ress »
§
7­
Press »
8!
– Modem will be connected.
8­ In the »NETWORK« menu, press »
check status of the network connection.
– N etwork connection status will be
displayed.

9­
Press »
press »
«.
>
« then » « to select »Network«
 «.
NETWORK
Modem_1
WPA2 PSK
Modem_2
WPA2 PSK
Modem_3
WPA2 PSK
See All Networks
Join Network Using WPS (Button)
Join Network Using WPS (PIN)
« to select »See All Networks« and
« to confirm.
« or » « to select the network you
Λ
« and move to the next
Λ
 «.
« to switch between
« to delete the character typed.
« to select »CONNECT«.
« to return to the previous menu or
« to return to »Home« menu.
ENGLISH
Signal Strength
Very Good
Security
WPA2 PSK
Available
 «.
<
«,
 « to
« to
8!
73­