Turning On The Television And Switching It To Standby Mode; Adjusting The Volume; Changing The Channel - Grundig 32 VLE 6020 User Manual

OVERVIEW
Service: Service only.
7
­ L AN: Network connection.
7
­ O ptic­Out: optical audio output.
7
­ U SB(HDD): For external data media.
7
­ H DMI3­(ARC): Input for digital audio and
7
image data.
­ H DMI2:­Input for digital audio and image
7
data.
­ S ATELLITE:­Input for satellite antenna signal.
7
Suitable for single-cable SCR system.
­ A NT­IN: For antenna cable (terrestrial
7
antenna or cable connection).
I R­OUT: IR Blaster output.
7
­ U SB­1: For data media and keyboard.
7
­ H DMI1:­Input for digital audio and image
7
data.
­ C I: For CA modules for receiving scrambled
7
channels.
14­ ENGLISH
­--------------------------------------------------------------------------------------------------------------
Buttons­of­the­remote­
control
Turning­on­the­television­and­
switching­it­to­standby­mode
1­ Press 8 /I to turn on the television in the
stand-by mode.
2­ Press 8 /I to switch the television to the
stand-by mode.
Adjusting­the­volume­
1­
Press V/P.
2­ Press + or –­to select »Volume« and press
V/P­to confirm.
3­
Use + to increase volume.
4­
Use – to decrease volume.
Changing­the­channel­
1­ Press V/P.
2­
Press + or –­to select »Channels« and press
V/P­to confirm.
3­ Press + to go to the channel.
4­ Use – to go to the previous channel.