NETWORKSETUP
Wirelessnetworkconfiguration
You have several ways to connect your TV to
your home network.
Automatic connection,
a ll data regarding connection settings
(»IP Address«, »Netmask«, »Gateway«
and »DNS«) are obtained from modem
automatically.
D epending on the router, you can use the
following options:
– O ption "WPS-Button"
– Connection with WPS PIN;
– C onnection with Network Password
1
B
Manual connection,
a ll data regarding connection settings (»IP
Address«, »Netmask«, »Gateway« and
»DNS«) must be configured manually.
72
ENGLISH
- ------------------------------------------------------------------------------------------
Technicalrequirements
Most home networks are Dynamic Networks.
If you have a dynamic network, you must use
a DSL modem that supports DHCP. Modems
and IP sharers that support DHCP obtain the »IP
Address«, »Netmask«, »Gateway« and »DNS«
values required for internet access automatically,
and thus you are not required to enter those
values manually.
WirelessWPSnetworkconnectionby
pressingabutton
1
Press »
2
Press »
3
Press »
and confirm with »
– » NETWORK« menu will be displayed.
4
Press »
WPS (Button)« and press »
– » Press the Wi-Fi Protected Setup button on
5
Push the WPS button on your router.
– » Connected to Wi-Fi network
6
In the »NETWORK« menu, press »
check status of the network connection.
– N etwork connection status will be
7
Press »
press »
«.
>
« to select »Settings«.
>
« then »
« to select »Network«
V
«.
« to select »Join Network Using
V
your router.« will be displayed.
JOIN NETWORK USING WPS (BUTTON)
Cancel
Network
"Modem_1".« will be displayed and the
modem will be connected.
displayed.
« to return to the previous menu or
« to return to »Home« menu.
«.
Searching for Wi-Fi...
Press the Wi-Fi Protected Setup
button on your router.
It may be called "WPS" or
contain this symbol:
« to
8!