TRENDnet TE100-S86FX User Manual page 9

The maximum range of a 100BASE-TX network connected to the
switch is 100 meters with Category 5 shielded twisted-pair and
unshielded twisted-pair (STP/UTP) cable. A 10BASE-T
network may range up to 100 meters with Category 3, 4, or 5
STP/UTP cable. As for the length of FX fiber link between a
switch and Data Terminal Equipment, FX is capable to span at
least 2 Kilometers using 62.5/125-micron fiber-optic cable in
full-duplex mode and 412 meters in half-duplex mode.
The following table summarizes the port and cable specifications
for this switch.
Speed Connector
100BASE-TX RJ-45
10BASE-T RJ-45
100BASE-FX Straight-tip (ST
or SC)
Fast EthernetSwitch
User's Guide
Fast Ethernet Switch
Port Speed Cable
Half/Full
Duplex
00/200 Mbps 100M, Category 5
STP/UTP
10/20 Mbps 100M, Category 3, 4,
or 5 STP/UTP
00/200 Mbps 62.5/125 micron
Multi-Mode
fiber-optic cable
9