1. Avant de commencer Contenu de l'emballage Ÿ TE100-S50g/TE100-S80g Ÿ Guide d´installation rapide en plusieurs langues Ÿ Adaptateur secteur (7.5V DC, 1A) Si tout le contenu ci-dessus sont manquantes, s'il vous plaît contactez votre revendeur. Minimum Requirements Ÿ Un ordinateur avec un adaptateur réseau correctement installé...
Page 3
L'installation est maintenant complète. Si vous désirez des informations détaillées sur la configuration et les paramètres avancés du TE100-S50g/TE100-S80g, veuillez consulter la rubrique Dépannage, le guide de l'utilisateur sur CD-ROM ou le site Internet de TRENDnet sur http://www.trendnet.com.
Do not place heavy objects on the switch 2. Hardware Installation 1. Connect the Power Adapter to the TE100-S50g/TE100-S80g and then to a power outlet. 2. Connect a CAT-5, CAT-5e or CAT-6 RJ-45 network cable from the computer to an available Ethernet port on the TE100-S50g/ TE100-S80g.
Page 5
Ÿ Not Illuminated: Connection for the port is 10/20 (Half/Full) or nothing is detected on the port. Your configuration is complete For detailed information regarding the TE100-S50g/TE100-S80g’s configuration and advanced settings, please refer to the Troubleshooting section, or TRENDnet's website at http://www.trendnet.com.
Power Adapter 7.5V DC, 1A External Power Adapter Dimensions Ÿ TE100-S50g: 116 x 25 x 70 mm (4.57 x .98 x 2.76 in.) Ÿ TE100-S80g: 136 x 25 x 70 mm (5.35 x .98 x 2.76 in.) Weight Ÿ TE100-S50g: 225g Ÿ...
Page 7
1. Les voyants ne s'allument pas lorsque le Switch est branché sur le secteur. Vérifiez que l'adaptateur d'alimentation externe du TE100-S50g/TE100-S80g est bien branché à la prise de courant. Vérifiez également que la prise murale est sous tension 2. Lorsque je connecte un ordinateur au port du commutateur, le LED LINK/ACT s'allume, mais le LED 100Mbps reste éteint.
5. Where is the uplink port located on the switch? Since all the ports on the switch are Auto-MDIX, any of the ports can be used as an uplink port. If you still encounter problems or have any questions regarding the TE100-S50g/TE100-S80g please contact TRENDnet's Technical Support Department.