Setting The Sensitivity - Ricoh R06010 Start Manual

Bulb Exposure
1
Set the mode dial to M.
2
Use R to set the
aperture value.
3
To enable the timed exposure, press M, and
then use Q to set the exposure time.
You can set the exposure time within the range from 10" to
20'00".
4
Press 0.
While 0 is pressed, exposure continues.
If the timed exposure is enabled in Step 3, the exposure
ends when the set exposure time elapses after 0 is
fully pressed.
1
2
8.0 8.0
F F
1600 1600
99999 99999
3
4

Setting the Sensitivity

Press A in standby mode.
Use AB to select an item.
Sets the range to be
adjusted
ISO automatically.
AUTO Both the upper limit
and lower limit can be
changed.
Sets a fixed value from
ISO ISO 100 to ISO
102400.
Use Q or R to change the value.
Press E.
The camera returns to standby mode.
1/ 1/ 250 250 F5.6 F5.6 0.0 0.0
- -
100 100 3200 3200
100 100
Cancel Cancel OK OK
37