EVGA H370 Stinger User Manual page 62

EVGA H370 Stinger (111-CS-E371)
your array status and any drives that are not currently configured in a RAID array. The
Non-RAID Physical Disks list will display any remaining drives on the controller,
whether it is a random storage drive, a boot drive, or a replacement drive installed to
replace a failed unit. For this example, you will see a degraded array and a "Non-RAID
Physical Disk," which we've attached to repair the degraded array.
The drive attached is an exact match to the other drives in our RAID5; however, you
can use a different drive if it is the same size and preferably same type/series, as well.
**ALL DATA ON THAT DRIVE WILL BE REMOVED AND WILL NOT BE
RECOVERABLE WHEN ADDING IT INTO THE ARRAY** The controller
will also give you this information, but it cannot be overstated that using a drive with
data on it will
result in the
total loss of all
previous data in
favor of the
data on the
array.
Select the degraded RAID volume, then select "Rebuild" on the following menu.
- 62 -