EVGA H370 Stinger User Manual page 32

Table of Contents

Advertisement

EVGA H370 Stinger (111-CS-E371)
EPS 8-pin 12V Power (PWR
)
8P
, the 8-pin ATX 12V power connection(s), is used to provide
EPS PWR 8P
power to the CPU. Align the pins to the connector and press firmly until
seated. Please remember to make sure that the tab on the EPS socket is aligned
with the release clip on the cable. NOTE: If the tab and release clip are on
opposite sides, yet the power connector fits, then you are using a PCIe 8-pin
cable, which WILL damage the board if powered on. Please review installation
instructions from your power supply manufacturer to verify which connectors
may be used for the CPU power.
- 32 -

Advertisement

Table of Contents
loading

This manual is also suitable for:

111-cs-e371

Table of Contents