EVGA H370 Stinger User Manual page 52

EVGA H370 Stinger (111-CS-E371)
In the case of a drive
failure, the array
controller will notify
you. When you replace
a failed drive in the
RAID10, rebuilding the
array is mostly seamless.
For example, look at the
array on the second row
to the right. P-Drive1
failed, but P-Drive2 is
still working and uses
the same data. The
array will pull data from
P-Drive2 during the
rebuild, so the array can
be used normally while
P-Drive2 copies ALL of
its data back to the
drive replacing P-
Drive1.
The rebuild process will
only rebuild 1TB worth
of data because only
one node failed. There
will be a performance
hit during the rebuild
process, which can be
further delayed if
VERY data intensive
applications are used,
but overall performance
of the array will still be
more than fast enough
to run effectively during
the rebuild. RAID10
rebuilds much more
quickly than its
predecessor RAID0+1.
RAID 10 (6 Drive)
P-DRIVE1 P-DRIVE2 P-DRIVE3
P-DATA-A P-DATA-A P-DATA-B
L-Drive = DATA-A
P-DRIVE1 P-DRIVE2 P-DRIVE3
P-DATA-A P-DATA-A P-DATA-B
L-Drive = DATA-A
P-DRIVE1 P-DRIVE2 P-DRIVE3
P-DATA-A P-DATA-A P-DATA-B
L-Drive = DATA-A
P-DRIVE1 P-DRIVE2 P-DRIVE3
P-DATA-A P-DATA-A P-DATA-B
L-Drive = DATA-A
P-DRIVE1 P-DRIVE2 P-DRIVE3
P-DATA-A P-DATA-A P-DATA-B
L-Drive = DATA-A
P-DRIVE1 P-DRIVE2 P-DRIVE3
P-DATA-A P-DATA-A P-DATA-B
L-Drive = DATA-A
L-DRIVE = ≃ 3TB
P-DRIVE4 P-DRIVE5
P-DATA-B P-DATA-C
L-Drive = DATA-B
L-Drive = DATA-ABC
P-DRIVE4 P-DRIVE5
P-DATA-B P-DATA-C
L-Drive = DATA-B
L-Drive = DATA-ABC
P-DRIVE4 P-DRIVE5
P-DATA-B P-DATA-C
L-Drive = DATA-B
L-Drive = DATA-ABC
P-DRIVE4 P-DRIVE5
P-DATA-B P-DATA-C
L-Drive = DATA-B
L-Drive = DATA-ABC
P-DRIVE4 P-DRIVE5
P-DATA-B P-DATA-C
L-Drive = DATA-B
L-Drive = DATA-ABC
P-DRIVE4 P-DRIVE5
P-DATA-B P-DATA-C
L-Drive = DATA-B
L-Drive = DATA-ABC
P-DRIVE6
P-DATA-C
L-Drive = DATA-C
P-DRIVE6
P-DATA-C
L-Drive = DATA-C
P-DRIVE6
P-DATA-C
L-Drive = DATA-C
P-DRIVE6
P-DATA-C
L-Drive = DATA-C
P-DRIVE6
P-DATA-C
L-Drive = DATA-C
P-DRIVE6
P-DATA-C
L-Drive = DATA-C
- 52 -