Biostar H510MX/E 2.0 User Manual page 43

Hide thumbs Also See for H510MX/E 2.0:
Table of Contents

Advertisement

Package C-State Demotion
This item sets Package C state Demotion.
Options: Enabled (Default) / Disabled
Package C-State Un-demotion
This item sets Package C-State Un-demotion.
Options: Enabled (Default) / Disabled
CState Pre-Wake
Disable - Sets bit 30 of POWER_CTL MSR(0x1FC) to 1 to disable the Cstate Pre-Wake.
Options: Enabled (Default) / Disabled
IO MWAIT Redirection
This item enableds or disableds IO MWAIT Redirection. When set, will map IO_read instructions
sent to TO registers PMG_IO_BASE_ADDRBASE+0 ffset to MWAIT (offset).
Options: Disabled (Default) / Enabled
CFG Lock
This item confgire MSR 0xE2[15], CFG lock bit.
Options: Disabled (Default) / Enabled
Thermal Monitor
This item enables or disables Thermal Monitor.
Options: Enabled (Default) / Disabled
AVX2 Ratio Offset
This item AVX2 Ratio Offset. Specifies number of bins to decrease AVX ratio vs. Core Ratio. AVX is
a more stressful workload, it is helpful to lower the AVX ratio to ensure maximum possible ratio
for SSE workloads.
Options: Auto (Default)
TjMax Offset
This item TjMax Offset. Specified value here is clipped by pCode to support TjMax in the range of
62 to 115 deg Celsius.
Options: Auto (Default)
TVB Ratio Clipping
This service controls Core frequency reduction caused by high package temperatures for
processors that implement the Intel Thermal Velocity Boost (TVB) feature.
Options: Disabled (Default) / Enabled
TVB Voltage Optimizations
This service controls thermal based voltage optimizations for processors that implement the Intel
Thermal Velocity Boost (TVB) feature. Uses Overclocking Mailbox command 0x18/ 0x19
Options: Enabled (Default) / Disabled
H510MH 2�0 | H510MX/E 2�0 | H510MH/E 2�0
6. Tweaker Menu | 43

Advertisement

Table of Contents
loading

This manual is also suitable for:

H510mh 2.0H510mh/e 2.0

Table of Contents