Biostar H510MX/E 2.0 User Manual page 24

Hide thumbs Also See for H510MX/E 2.0:
Table of Contents

Advertisement

Internal Graphics
This item keeps IGFX enabled based on the setup options.
Options: Auto (Default) / Disabled / Enabled
Primary Display
This item selects which of IGFX/PEG/PCI Graphics device should be Primary Display or select SG
for Switchable Gfx.
Options: Auto (Default) / IGFX / PEG / PCI
GTT Size
This item selects GTT Size.
Options: 8MB (Default) / 4MB / 2MB
Aperture Size
This item selects Aperature Size. Note : Above 4GB MMIO BIOS assignment is automatically
enabled when selecting 2048MB aperture. To use this feature, please disable CSM Support.
Options: 256MB (Default) / 128MB / 512MB / 1024MB
DVMT Pre-Allocated
This item selects DVMT 5.0 Pre-Allocated (Fixed) Graphics Memory size used by the Internal
Graphics Device.
Options: 60M (Default) / 64M / 96M / 128M / 160M / 4M / 8M / 12M / 16M / 20M / 24M / 28M
/ 32M/F7 / 36M / 40M / 44M / 48M / 52M / 56M
DVMT Total Gfx Mem
This item selects DVMT5.0 Total Graphic Memory size used by the Internal Graphics Device.
Options: 256MB (Default) / 128MB / MAX
PAVP Enable
This item enables or disables PAVP.
Options: Enabled (Default) / Disabled
Max TOLUD
Maximum Value of TOLUD. Dynamic assignment would adjust TOLUD automatically based on
largest MMIO length of installed graphic controller.
Options: Dynamic (Default) / 1 GB / 1.25 GB / 1.5 GB / 1.75 GB / 2 GB / 2.25 GB / 2.5 GB / 2.75 GB
/ 3 GB / 3.25 GB / 3.5GB
VT-d
This item enables or disables VT-d capability.
Options: Enabled (Default) / Disabled
Above 4GB MMIO BIOS assignment
This item enables or disables above 4GB MemoryMappedIO BIOS assignment. This is enabled
automatically when Aperture Size is set to 2048MB.
Options: Enabled (Default) / Disabled
PCIEG4X16
MAX Link Speed
Configure PCIEG4X16 Max Speed.
Options: Auto (Default) / Gen1 / Gen2 / Gen3 / Gen4
24 | 3. Chipset Menu

Advertisement

Table of Contents
loading

This manual is also suitable for:

H510mh 2.0H510mh/e 2.0

Table of Contents