Table of Contents
Advertisement
Fast Boot
This item enables or disables boot with initialization of a minimal set of devices required to launch
active boot option. Has no effect for BBS boot options.
Options: Disabled (Default) / Enabled
Note
» The following items appear only when you set the Fast Boot function to [Enabled]
SATA Support
If Last Boot HDD Only, Only last boot HDD device will be available in post. If all SATA devices, all
SATA devices will be available in OS and post.
Options: Last Boot HDD Only (Default) / All Sata Devices
VGA Support
If Auto, only install Legacy OpRom with Legacy OS and logo would NOT be shown during post.
EFI driver will still be installed with EFI OS.
Options: EFI Driver (Default) / Auto
USB Support
If Disabled, all USB devices will NOT be available until after OS boot. If Partial Initial, USB Mass
Storage and specific USB port/device will NOT be available before OS boot. If Enabled, all USB
devices will be available in OS and Post.
Options: Full Initial (Default) / Partial Initial / Disabled
PS2 Devices Support
If Disabled, PS2 devices will be skipped.
Options: Enabled (Default) / Disabled
Network Stack Driver Support
If Disabled, Network Stack Drivers will be skipped.
Options: Disabled (Default) / Enabled
Redirection Support
If disable, Redirection function will be disabled.
Options: Disabled (Default) / Enabled
CSM Support
This option enables or disables CSM support.
Options: Disabled (Default) / Enabled
Note
» The following items appear only when you set the CSM Support function to [Enabled]
GateA20 Active
Upon Request – GA20 can be disabled using BIOS services. Always – do not allow disabling GA20;
this option is useful when any RT code is executed above 1MB.
Options: Upon Request (Default) / Always
Option ROM Messages
This item sets the display mode for Option ROM.
Options: Force BIOS (Default) / Keep Current
28 | 4. Boot Menu
Advertisement
Table of Contents
