Biostar H510MX/E 2.0 User Manual page 10

Preboot BLE
This item enables or disables Preboot Bluetooth function.
Options: Disabled (Default) / Enabled
Note
» The following items appear only when you set the Preboot BLE function to [Enabled].
BLE Reconnection Delay
This item Delay prior to connecting BLE host controller. Value between 0-1000ms. Default is
100ms.
Options: 100 (Default)
WWAN Configuration
WWAN Device
This item enables or disables M.2 WWAN Device.
Options: Disabled (Default) / Enabled
Note
» The following items appear only when you set the WWAN Device function to [Enabled].
WWAN Reset Workaround
This item enabling this workardound will result in BIOS asserting FULL_CARD_POWER_OFF#
WWAN signals before the WWAN Device Power-On Sequence is executed. Disabling it has no
impact.
Options: Enabled (Default) / Disabled
10 | 2. Advanced Menu