Ordering Of Spare Parts - Siemens SITRANS SCM IQ Compact Operating Instructions

Service and maintenance
6.4 Ordering of spare parts
1. Stop anomaly detection models of the respective SITRANS MS200.
2. Change assignment to MindSphere asset of SITRANS MS200 in SITRANS SCM IQ by clicking
on "Device configuration >
3. Delete machine learning models based on old data from asset (if existing) by clicking on
"Sensor data modelling" > click on your sensor > "See details".
4. Train new anomaly detection model model only based on new data.
Moving SITRANS MS200 to another machine (different MindSphere asset, different
SITRANS CC220)
Note
In this scenario the already used SITRANS MS200 is utilized to monitor a different physical asset.
1. Stop anomaly detection models of the respective SITRANS MS200.
2. Reposition SITRANS MS200.
3. Make sure SITRANS MS200 is powered up.
4. Reset SITRANS MS200.
AUTOHOTSPOT
5. Change assignment to gateway and MindSphere asset of SITRANS MS200 in SITRANS SCM IQ
by clicking on "Device configuration >
6. Delete anomaly detection models based on old data from asset (if existing) by clicking on
"Sensor data modelling" > click on your sensor > "See details".
7. Train new anomaly detection model only based on new data.
6.4

Ordering of spare parts

Condition
• You have a Siemens Industry Mall account.
Procedure
1. Open the PIA Life Cycle Portal (https://www.pia-portal.automation.siemens.com).
2. Select the desired language.
58
> Configure sensor".
> Configure sensor".
Compact Operating Instructions, 10/2023 - DRAFT, A5E...-AA
SITRANS CC220 and SITRANS MS200