TP-Link TD-W8910GB User Manual page 33

5. Bridge
If you choose Bridging in the previous screen (shown in Figure 4-5), a screen will be
displayed as shown below (shown in Figure 4-12).
1) If you want to adopt the Bridge service, you have to select the Enable Bridge Service
option in the screen above, or else the service will not take effect.
2) Enter the service name in this screen, otherwise leave the default setting.
3) Click the Next button, and you will see the next screen which displays the detailed
settings you've made (shown in Figure 4-13). Or else click the Back button to return to
the previous screen to make modifications.
4) If you are sure about the configuration, click the Save button to save these settings,
otherwise click the Back button to return to the previous screen to make modifications.
TD-W8910GB 54M Wireless ADSL2+ Router User Guide
Figure 4-12
Figure 4-13
26