Table of Contents
Advertisement
Chapter 3. Quick Installation Guide
After connecting the Router to your network, you should configure it. This chapter describes how
to quickly configure the basic functions of your Router. These procedures only take you a few
minutes. You can access the Internet via the Router immediately after successfully configuring.
3.1 Configure PC
Your PC needs a network adapter. You may directly connect your adapter to the Router, or you
may connect your adapter to a Hub/Switch, and then connect the Hub/Switch to the Router.
Follow the instructions below to configure a computer running Windows XP to be a DHCP client.
1.
From the Start menu on your desktop, go to Settings, and then click on Network
Connections.
2.
In the Network Connections window, right-click on LAN (Local Area Connection), then click
Properties.
TD-W8910GB
54M Wireless ADSL2+ Router User Guide
Figure 3-1
7
Advertisement
Table of Contents
