ENGINE STARTING
Primer Pump
Fig.1
Choke Lever
Close
Open
Fig.2
Throttle Lever
Fig.3
8
• Push the primer pump several times until overflown fuel
flows out. (Fig.1)
• Close the choke lever, and move the throttle lever
1/4~1/3 open position. (Fig.1)(Fig.2)
• Pull the starter(knob) quickly until first firing noise.
(Fig.3)
• Open the choke(Fig.2), throttle idle~1/4 open
• Pull the starter quickly
• Operate engine for a few minutes for the warming up.
IMPORTANT
• In case of engine warm condition, choking may not be
necessary.
• Over choking may cause starting difficulty due to wet
spark plug.
In this case change spark plug or dry it, and remove
fuel rest in the cylinder by pulling starter.