Starting; How To Stop The Engine - Zenoah G320PUM Owner's Manual

Starting

● How to start
a. Fill the fuel tank with the fuel.
b. Push the priming bulb upper the carburetor until fuel appears in the priming bulb.
c. Choke the engine and open the throttle valve approximately 1/4~1/3 of the full
open position.
d. Quickly pull the starter cord until the initial combustion noise is heard.
e. When the initial combustion noise is heard, open the choke, set the throttle valve
at the idle position or at the position slightly open from the idle position and
quickly pull the starter cord a few more times. Then the engine starts.

How to Stop The Engine

For stopping the engine, the red lead wire
from the coil should be grounded to the
engine body, or the throttle valve should be
closed completely.
Black
Lead
Kill Switch
Red
Lead
9